毕业论文设计《单螺杆食品挤出机》.docVIP

PAGE 40 摘 要 针对设计要求，对单螺杆食品挤出机进行了设计。主要包括传动系统、挤出系统、加料系统、冷却和加热系统的设计。此单螺杆挤出机是通过电机将动力传给带轮，经减速传给螺杆，为了满足变速范围的要求，采用普通电机加变频器进行无级调速。为了便于安装和拆卸，机筒采用的是左右剖分式结构，分三段进行加热和冷却。通过电磁阀和传感器进行温度的控制和冷却水的进出，保证温度在所允许的范围内。 关键词：单螺杆；挤出机；剖分式 Abstract According to the design requirement, the single screw food extruder is designed. Mainly comprises a transmission system, extrusion system, feeding system, the cooling and heating system design. The single screw extruder is through the motor transmits power to the belt wheel through a speed reducer, transmitted to a screw, in order to meet the requirements of speed range, the common motor with frequency converter for stepless speed regulation. In order to facilitate the installation and disassembly, barrel is based around a split structure, is divided into three parts for heating and cooling. Through an electromagnetic valve and a sensor for temperature control and cooling water import, ensure the temperature in the allowed range. Keyword single-screw； extruder；split 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325978879 摘 要 PAGEREF _Toc325978879 \h I HYPERLINK \l _Toc325978880 Abstract PAGEREF _Toc325978880 \h II HYPERLINK \l _Toc325978882 第1章 绪 论 PAGEREF _Toc325978882 \h 1 HYPERLINK \l _Toc325978883 1.1 研究的意义 PAGEREF _Toc325978883 \h 1 HYPERLINK \l _Toc325978884 1.2 挤压技术的发展 PAGEREF _Toc325978884 \h 1 HYPERLINK \l _Toc325978885 1.3 国内外发展的现状 PAGEREF _Toc325978885 \h 2 HYPERLINK \l _Toc325978886 1.4 挤压加工的原理 PAGEREF _Toc325978886 \h 3 HYPERLINK \l _Toc325978887 第2章 方案设计 PAGEREF _Toc325978887 \h 5 HYPERLINK \l _Toc325978888 2.1 设计的要求 PAGEREF _Toc325978888 \h 5 HYPERLINK \l _Toc325978889 2.2 方案设计部分 PAGEREF _Toc325978889 \h 5 HYPERLINK \l _Toc325978890 2.2.1 方案的整体确定 PAGEREF _Toc325978890 \h 5 HYPERLINK \l _Toc325978891 2.2.2 机筒与螺杆材料的选择 PAGEREF _Toc325978891 \h 6 HYPERLINK \l _Toc325978892 第3章 设计计算 PAGEREF _Toc325978892 \h 8 HYPERLINK \l _Toc325978893 3.1 传动系统设计 PAGEREF _Toc325978893 \h 8 HYPERLINK \l _Toc325978