- 4
- 0
- 约5.56万字
- 约 33页
- 2018-10-10 发布于广西
- 举报
PAGE
PAGE 2
计算机网络(双语)论文
作 者:
学 号:
院 系: 自动化工程学院
专 业: 测控技术与仪器082
题 目: COMPUTER NETWORK
指导者:
评阅者:
Catalogue
Preface………………………………………………………3
Basics…………………………………………………………5
Ultra-High-frequency communication (≥100 MHz)…………………5
Home networking (LAN)…………………………………………………6
Internet access (broadband over powerlines)……………………8
Medium frequency (kHz)………………………………………………10
Low-speednarrow-band communication…………………11
High-speed narrow-band powerline communication?— distribution line carrier……………………………………………………………13
Transmitting radio programs…………………………………………14
Utility applications…………………………………………………15
Low frequency (kHz)…………………………………………………16
Broadband over power line (BPL)……………………………………17
notching out and dynamic adaptation to contention………………………………………………………………18
Interference issue remains a challenge to PLC systems………19
Automotive uses…………………………………………………………21
Failure Scenarios………………………………………………………21
IEEE P1901, ITU G.hn home grids……………………………………22
Standards organizations………………………………………………24
Small and medium-sized enterprise office LAN construction scheme……………………………………………25
Personal feeling…………………………………………30
Reference directory……………………………………………32
Preface
This article is now in its fourth edition. Each edition has corresponded to a different phase in the way computer networks were used. When the first edition appeared in 1980, networks were an academic curiosity. When the second edition appeared in 1988, networks were used by universities and large businesses. When the third edition appeared in 1996, computer networks, especially the Internet, had become a daily reality for millions of people. The new item in the fourth edition is the rapid growth of wireless networking in many forms. The networking picture has changed radically since the third edition. In the mid-1990s, numerous kinds of LANs and WANs existed, along with multiple protocol stacks. By 2003, the only wired LAN in widespread use was Ethernet, and virtually all WANs were on the Internet.
A
您可能关注的文档
- (毕业论文毕业设计)-(680)拖拉机半轴壳端面钻孔夹具设计.doc
- (毕业论文毕业设计)- 基于BS模式的企业人事管理系统的设计与实现.doc
- (毕业论文毕业设计)- 基于VC的成三棋游戏程序的设计与实现.doc
- (毕业论文毕业设计)-(深层搅拌桩支护).doc
- (毕业论文毕业设计)-(无糖凝固型酸奶).doc
- (毕业论文毕业设计)-(我公司窑尾大布袋收尘器运行经验及技术改造措施).doc
- (毕业论文毕业设计)-_基于CPLD的USB下载线的设计.doc
- (毕业论文毕业设计)-_基于脑机接口的智能轮椅原型机的研究.doc
- (毕业论文毕业设计)-_教学资源管理系统.doc
- (毕业论文毕业设计)-_可旋转中心架的设计.doc
- 《GB/T 46962-2026印刷技术 安全印刷过程管理》.pdf
- 中国国家标准 GB/T 46962-2026印刷技术 安全印刷过程管理.pdf
- GB/T 46962-2026印刷技术 安全印刷过程管理.pdf
- 中国国家标准 GB/T 32580.5-2026轨道交通 地面装置 高压交流开关设备及互感器 第5部分:27.5 kV和2×27.5 kV金属封闭开关设备和控制设备.pdf
- 《GB/T 32580.5-2026轨道交通 地面装置 高压交流开关设备及互感器 第5部分:27.5 kV和2×27.5 kV金属封闭开关设备和控制设备》.pdf
- GB/T 33248-2026印刷技术 胶印橡皮布.pdf
- GB/T 18282.6-2026医疗产品灭菌 化学指示物 第6部分:用于小型蒸汽灭菌器性能测试的二类指示物和过程挑战装置.pdf
- 中国国家标准 GB/T 18282.6-2026医疗产品灭菌 化学指示物 第6部分:用于小型蒸汽灭菌器性能测试的二类指示物和过程挑战装置.pdf
- 中国国家标准 GB/T 31308.1-2026行政、商业和行业中的数据元、过程和文档 长效签名 第1部分:CMS高级电子签名(CAdES)规范.pdf
- GB/T 31308.1-2026行政、商业和行业中的数据元、过程和文档 长效签名 第1部分:CMS高级电子签名(CAdES)规范.pdf
原创力文档

文档评论(0)