- 4
- 0
- 约2.17万字
- 约 23页
- 2018-10-10 发布于湖北
- 举报
毕业论文客车超载控制系统设计
论文题目:客车超载控制系统设计
摘 要
针对当前客车超载不断引发重大事故,设计了一种客车超载监控系统。本设计以AT89c51单片机为核心。通过红外线发射接收装置对客车的载客人数进行检测,然后由单片机对检测到的数据进行分析处理,同时检测到的结果会由LED显示出来,如果客车超载,扬声器先进行报警,而后由继电器切断汽车的打火装置,从而最终实现对超载情况进行相关控制。
关键词: 客车超载控制系统;红外线传感器;单片机
Absract
According to the overloading of the current bus causing the major accident,the paper designs a kind of monitoring system about the bus overloading.The designing is at the core of AT8951 single-chip.This designing detects the number of passengers on bus by Fired infra-red receiver,and then it analyses detected data through the single-chip,as the same time LED will displayed detecte
原创力文档

文档评论(0)