消失模铸造工艺流程jDie casting prcess j.docVIP

消失模铸造工艺流程j（Die casting process j） Process flow jiq: 1. Make foam white mould, combine the casting system, the surface brush of the gasification mould, the special heat-resistant coating and drying. 2, put special interlayer sand box in vibration workbench, fill in the sand, dry sand vibration compaction, leveling, put on the sand at the bottom of the drying of gasification mode, filled with dry sand, micro vibration time leveling appropriate box. 3. Cover with plastic film, put on the pouring cup, vacuum system vacuum, and after the dry sand is firmly formed, casting, the white mould gasification disappears, and the metal liquid displaces its position. 4. Release the vacuum and remove the casting from loose dry sand. Epc process set solid mold casting, the advantages of v method casting process is an organic whole, suitable for cast steel, cast iron, cast copper, cast aluminum, etc various brands, a variety of materials, different structure of large, medium and small various types of castings. Use dry sand solid, prototype is original; The casting dimensions are high and uniform. No core, no box, no flying edge, burr; The surface smoothness is close to precision casting, internal structure is stable, and the casting defects such as sand and air are eliminated. The whole production process is environmentally friendly and pollution-free. Conclusion: to sum up, die casting is in line with the general trend of casting technology development, and has broad prospects. Compared with the traditional casting technology, the lost die casting technology has the advantages of unrivalled. In 1999, the state ministry of science and technology of epc technology listed as national key high and new technology, known by casting industry at home and abroad as the 21st century foundry technology green revolution in foundry industry. Reduced dust, smoke and noise pollution, greatly improved the working environment of casting workers, reduced labor Dynamic strength, the male-oriented ind