基于PLC在混煤装车集中控制系统中的设计及应用.docVIP

PAGE PAGE 8 摘 要 随着科学技术的日新月异，自动化程度要求越来越高，原有的生产装料装置远远不能满足当前高度自动化的需要。减轻劳动强度，保障生产的可靠性、安全性，降低生产成本，减少环境污染、提高产品的质量及经济效益是企业生成所必须面临的重大问题。我们为各个装料生产领域所生产的可编程控制器装料系统。它集成自动控制技术、PID控制技术、计量技术、新传感器技术、计算机管理技术于一体的机电一体化产品；充分利用计算机技术对生产过程进行集中监视、控制管理和分散控制；充分吸收了分散式控制系统和集中控制系统的优点，采用标准化、模块化、系统化设计，配置灵活、组态方便。 关键词:PLC ；PID控制；传感器 Abstract Along with sciences and technologys changing with each new day, the automaticity request is getting higher and higher, the original production feeds the installment not to be able to satisfy current highly automated by far the need. Reduces the labor intensity, the safeguard production reliability, the security, reduces the production cost, reduces the environmental pollution, to enhance the product the quality and the economic efficiency is the major issue which the enterprise produces must face. We feed the programmable controller charging system which one by one realm of production produces. It integrates the automatic control technology、the PID control technology、the measurement technique, the new sensor technology, the computer management technology in a bodys integration of machinery product; Carries on the centralism surveillance, the control supervisor fully using the computer technology to the production process and disperses the control; Has absorbed the dispersion-like control system and the common control systems merit fully, uses the standardization, the modulation, the systematized design, the disposition is nimble, the configuration is convenient. key word: PLC；PID control ；Sensor 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc264205043 摘 要 PAGEREF _Toc264205043 \h 1 HYPERLINK \l _Toc264205044 Abstract PAGEREF _Toc264205044 \h 2 HYPERLINK \l _Toc264205045 第一章 绪 论 PAGEREF _Toc264205045 \h 5 HYPERLINK \l _Toc264205046 1.1选题技术背景 PAGEREF _Toc264205046 \h 5 HYPERLINK \l _Toc264205047 1.1.1混煤装车系统在国内外的发展状况 PAGEREF _Toc264205047 \h 5 HYPERLINK \l _Toc264205048 第二章 系统概述及方案论证 PAGEREF _Toc264205048 \h 7 HYPERLINK \l _Toc264205049 2.1控制系统结构