（毕业学术论文设计）-使用可编程器件扩展的单片机系统设计.docVIP

PAGE 精品 使用可编程器件扩展的单片机系统设计 (吉首大学物理科学与信息工程学院　湖南　吉首　416000) 摘要 文中系统是基于CPLD与单片机的水温控制系统，通过对宏晶的stc89c52单片机的编程，把CPLD作为通道，CPLD模块是由Atera 公司epm1270t144组成，按照系统总体图对epm1270t144进行编程，控制其余外围器件驱动继电器，lcd1602和键盘，通过键盘设定水温把继电器作为开关控制电热丝加热并把键盘设定值和通过18b20采集的实时温度输送至单片机并在lcd1602上显示，实际温度达到设定温度将停止加热，从而达到水的温度保持基本恒定，该系统可据不同需要用于各种场合，具有可靠性好，精度高等优点。 关键词:Stc89c52单片机;CPLD;Epm1270t144;Lcd1602;18b20 Based On PLD-MCU Control System Yin longyou (College of Physics Sciece and Information Engineering,Jishou University,Jishou,Hunan 416000) Abstract The article is based on the CPLD and single-chip temperature control system design, through wibonb of programming stc89c52 single chip, the CPLD as a channel, CPLD module Atera by epm1270t144 company, in accordance with the overall system diagram of conduct for epm1270t144 Cheng, control the rest of the external drive relay devices, lcd1602 and keyboard, set the water temperature through the keyboard to control the relay switch as a filament electric heat and keyboard settings and 18b20 through the acquisition of real-time transmission to the single-chip temperature in the lcd1602 Shows that the actual temperature will stop heating temperature set in order to reach the water temperature constant, the system can be used to the different needs of various occasions, have good reliability, high precision. Key words:Stc89c52 Single Chip; CPLD; Epm1270t144; Lcd1602; 18b20 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc230682221 第一章 系统要求 PAGEREF _Toc230682221 \h 1 HYPERLINK \l _Toc230682222 1.1 任务 PAGEREF _Toc230682222 \h 1 HYPERLINK \l _Toc230682223 1.2 要求 PAGEREF _Toc230682223 \h 1 HYPERLINK \l _Toc230682224 1.2.1 基本要求 PAGEREF _Toc230682224 \h 1 HYPERLINK \l _Toc230682225 1.2.2 发挥部分 PAGEREF _Toc230682225 \h 2 HYPERLINK \l _Toc230682226 第二章 系统方案确定 PAGEREF _Toc230682226 \h 3 HYPERLINK \l _Toc230682227 2.1 控制模块方案 PAGEREF _Toc230682227 \h 3 HYPERLINK \l _Toc230682228 2.1.1 方案一 PAGEREF _Toc230682228 \h 3 HYPERLINK \l _Toc230682229 2.1.2 方案二 PAGEREF