热轧变形对TB-13合金组织和织构的影响-中国有色金属学报.PDF

20 1 2010 10 Vol.20 Special 1 The Chinese Journal of Nonferrous Metals Oct. 2010 1004-0609(2010)S1-s0006-05 TB-13 1 1 1 1 2 2 1 (1. 710072 2. 100095) X TB-13 TB-13 50%59% β {001} 110 Goss {110} 001 Goss TB-13 TG 146.2 A Influence of hot rolling deformation on microstructure and texture of TB-13 alloy 1 1 1 1 2 2 1 FEI Yue , CHANG Hui , TANG Bin , KOU Hong-chao , ZHU Zhi-shou , SHANG Guo-qiang , ZHOU Lian (1. State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China; 2. Beijing Institute of Aeronautical Materials, Aviation Industry Corporation of China, Beijing 100095, China) Abstract: The evolutions of microstructure and texture for TB-13 alloy during hot rolling were investigated by optical microscopy and X-ray diffracometry. The results show that the deformation mechanism is dynamic recovery in TB-13 alloy when the deformation reduction is less than 50%. When the deformation reduction is 59%, dynamic recrystallization occurs and the volume fraction of dynamic recrystallization increases with the increase of the deformation reduction. The equiaxed β grains are substituted for the recrystal grains, which leads to microstructure refinement. This indicates that the refinement mechanism is dynamic recrystallization. The main texture components of TB-13 alloy after hot rolling deformation are {001} 110 a