NCV7513FTR2G;NCV7513FTG;中文规格书，Datasheet资料.pdfVIP

NCV7513 FLEXMOS Hex Low-Side MOSFET Pre-Driver The NCV7513 programmable six channel low−side MOSFET pre−driver is one of a family of FLEXMOSTM automotive grade products for driving logic−level MOSFETs. The product is controllable by a combination of serial SPI and parallel inputs. It features programmable fault management modes and allows power−limiting PWM operation with programmable refresh time. MARKING The device offers 3.3 V/5.0 V compatible inputs and the serial output DIAGRAM driver can be powered from either 3.3 V or 5.0 V. Power−on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled. 32 LEAD LQFP NCV7513 Each channel independently monitors its external MOSFET’s FT SUFFIX AWLYYWWG CASE 873A drain voltage for fault conditions. Shorted load fault detection thresholds are fully programmable using an externally programmed reference voltage and a combination of four discrete internal ratio values. The ratio values are SPI selectable and allow different A = Assembly Location WL = Wafer Lot detection thresholds for each group of three output channels. YY = Year