市政给水管线施工工艺的探讨.docVIP

市政给水管线施工工艺的探讨 　　摘要：随着我国经济的不断增长，城市的发展速度很快，这使城市基础设施的压力越来越大，其中最为主要的是城市给水和排水问题，尤其是城市给水工程的质量倍受人们关注。目前城市的发展方向主要集中在对城市周边经济开发区的建立上，这些区域没有成熟的给水系统，在加上发展过快、人口激增等问题。直接为供水管线的施工带来了严峻的挑战。虽然我们在城市发展的过程中已经非常重视给水管线的问题，但是还是存在很多问题，例如供水量和水压问题，二次供水、水质等问题。这些问题都是市民以及政府所关切的并急需解决的，所以在这种形势下，提高市政排水的施工技术应用和施工质量控制就成为了给水工程的主要环节，只有及时处理好这些问题才能为城市的发展提供保证。 　　关键词：工艺；施工方案；质量控制 　　Abstract: with the increasing of economic in our country, the development of the city is very fast, which makes urban infrastructure increasing pressure, one of the most main is the city water supply and drainage problem, especially the quality of the urban water supply engineering much attention. At present the development direction of city economic development zone, mainly concentrated in the cities on the building of these areas are not mature water supply system, combined with development too fast, the problem such as population explosion. Directly for water supply pipeline construction has brought serious challenges. Though we are in the process of urban development has attaches great importance to the problem of water supply pipeline, but still exist many problems, such as water supply and water, secondary water supply, water quality and other issues. These questions are all citizens and governments concern and urgent, so in this situation, to improve the quality of municipal drainage construction technology and construction control became the main steps of water supply engineering, only deal with these problems in time can provide guarantee for the development of the city. 　　Key words: process; The construction plan; The quality control 　　中图分类号：TU991.36文献标识码：A文章编号：2095-2104(2013) 　　 　　 　　 　　引言： 　　给水和供水工程是十分重要的，这些工程的质量和施工效率对城市发展的影响很深，另外给水工程还对城市道路规划和城市环保起到很大的带动作用，如果在给水上出现问题就会为城市带来严重的灾难。所以采取合理的施工技术，提高给水线路的施工质量是非常有必要的。本文针对城市工程的给水工程施工工艺进行探讨，并对施工中出现的问题提出解决方案。 　　给水管线施工工艺的概述 　　1.给水管预制及安装 　　给水管线需要事先进行预制后，在基坑进行连接安装的。所以在进行下料和拼接前，要对管道走线和连接工艺进行细致的研究，要保证管材和管件规格相互配套。对受损的阀门和有质量缺陷的材料不能用于施工，要及时对损坏关键做好标记，防止发生误用的情况。在进行管线切割时，要针对