SMT资料印刷电路板有机保护焊剂OSP介绍.ppt

4. Assembly 後露出之裸銅部份,最好噴上一 層Epoxy或印Solder paste (Test pad, Test via , Tooling hole ). ENTEK 產品Assembly注意事項 /sundae_meng ENTEK 板子之儲存壽命 ● 6 個月(環境:20~30℃,40~70%相對 濕度). ● 比其它類型之保焊膜更堅固. ● 可以重工. /sundae_meng Thickness (microns) Heat Treatment Time (hours) 0 2 4 6 8 0.05 0.30 0.35 0.25 0.20 0.15 0.10 Entek Plus Cu-106A Thickness vs Heat Treatment Time at 150℃ /sundae_meng Entek Plus Cu-106A COATING THICKNESS ON COPPER AND GOLD # OF SMT Reflows 0 0.1 0.2 0.3 0.4 0.5 0 1 3 Microns Copper Gold 0.3 0 0.33 0.02 0.28 0 /sundae_meng Entek Plus Cu-106A ENTEK THICKNESS(MICRONS) 0.38 0.32 0.5 0.