基于3D打印技术的复杂胫骨平台骨折内固定手术数字化设计-ChinaXiv.PDFVIP

·218 · doi 10.3969/j.issn. 1673-4254.2015.02.12 J South Med Univ, 2015, 35(2): 218-222 临床研究 基基于于33DD 打印技术的复杂胫骨平台骨折内固定手术数字化设计打印技术的复杂胫骨平台骨折内固定手术数字化设计 黄华军，张国栋，欧阳汉斌，杨 洋，吴章林，许 靖，谢普生，黄文华 南方医科大学基础医学院解剖教研室//广东省生物力学重点实验室，广东 广州 510515 摘要：目的探讨3D 打印技术结合数字化技术在复杂胫骨平台内固定植入方案设计中的应用价值。方法 收集临床复杂胫骨平 台骨折病例以及常用胫骨平台钢板的CT 数据，在Mimics 中进行骨折三维重建、虚拟复位以及建立钢板三维模型库，然后进行 内固定方案的数字化设计。3D 打印出骨折复位模型以及钢板模型，在3D 模型上按照数字化设计内固定方案进行模拟手术。 比较数字化虚拟手术与3D 模型模拟手术的内固定植入效果。结果 3D 模型模拟手术的手术效果与内固定数字化设计方案的 手术效果一致，二者螺钉长度无明显差异（t=- 1.594; v= 12; P=0.137）。结论 3D 打印技术结合数字化设计能有效的提高复杂胫 骨平台骨折内固定植入效果。 关键词：胫骨平台骨折；内固定手术；3D 打印；数字化设计，计算机辅助，术前规划 1 Internal fixation surgery planning for complex tibial plateau fracture based on digital v 7 design and 3D printing 6 HUANG Huajun, ZHANG Guodong, OUYANG Hanbin, YANG Yang, WU Zhanglin, XU Jing, XIE Pusheng, HUANG Wenhua 1 Department of Anatomy, Guangdong Provincial Key Laboratory of Medical Biomechanics, School of Basic Medical Sciences, Southern 1 Medical University, Guangzhou 510515, China 0 . 2 1 Abstract: Objective To investigate the application of 3D printing and digital technology in preoperative assessment and 7 planning of internal fixation surgery for complex tibial plateau fracture. Methods Complex tibial plateau fractures and 1 commonly used plates for tibial plateau were imaged using computed tomography (CT) to reconstruct the 3D fracture and 0 plate models. The 3D models were used to perform virtual reduction and preoperative planning of internal fixation surgery 2 with the most appropriate plates assisted by the 3D library of plates. According to the optimal plan, the 3D physical models of : tibial plateau fractures and plates were 3