基于单片机的异型水箱仿真装置（包含原理图及源代码）.docVIP

内蒙古科技大学毕业设计说明书（毕业论文） PAGE 题 目：基于单片机的异型水箱仿真装置 基于单片机的异型水箱仿真装置 摘要 本设计的研究对象是以单片机为核心的异型水箱仿真装置，在为这一系统进行软硬件设计的过程中，发现和总结了一些实际问题，并通过解决这些问题，就异型水箱数学模型的建立、仿真装置硬件设计、软件设计展开讨论，力争在理论分析和实际应用上有所创新。 异型水箱仿真装置的核心是围绕异型水箱的数学模型来体现异型水箱的特性，并通过软件实现整个异型水箱的工作状态和功能。 对异型水箱数学模型的建立是本文工作的重点。异型水箱属于过程控制系统实验装置中的被控对象。由于被控对象的特性直接影响到整个系统的控制质量，所以其数学模型的建立非常重要。设计中通过机理演绎法推导并建立了其数学模型，并设计出了仿真装置。 关键词：单片机；异型水箱；数学模型 Study on The Simulation Set of Shaped Water Box Based on MCU Abstract The object of this paper is a simulation set of shaped water box based on MCU.In the process of designing on software and hardware for the system,a few practical problems have been found.To solve these problems,we discuss the mathematical model building,the designing on hardware and software,and want to develop some new conclusions in practice and theory. The core of the simulation set of shaped water box is to show the characteristic of shaped water box according to its mathematic model,and realizes its duty and function by software designing. The highlight of this paper is to build up the mathematical model of the shaped water box.The shaped water box belongs to a controlled member of process control system in the experiment installation.Since the characteristic of the controlled member directly influences the quality of the whole system,so it is very important that the mathematical model of the shaped water box is built.We have deduced and built its mathematic model by adopt the deductive method,and we have designed the device to simulate the shaped water box. Key words: MCU; Shaped water box; Mathematic model 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc201638123 摘要 PAGEREF _Toc201638123 \h I HYPERLINK \l _Toc201638124 Abstract PAGEREF _Toc201638124 \h II HYPERLINK \l _Toc201638125 第一章 绪论 PAGEREF _Toc201638125 \h 1 HYPERLINK \l _Toc201638126 1.1 研究背景 PAGEREF _Toc201638126 \h 1 HYPERLINK \l _Toc201638127 1.2 课题的目的及研究的主要内容 PAGEREF _Toc201638127 \h 1 HYPERLINK \l _Toc201638128 1.3 课题的意义