双罐式气泵供液制冷系统的理论与实验-研究.pdfVIP

ABSTRACT With the development of modern sciences, refrigeration has become an important discipline both for industrial production and daily life, to which wide application has been made. Thus, energy saving research about refrigeration system as well as that on high- performance system is now a core subject in refrigeration field. To improve airside and refrigerant-side heat emission coefficient in evaporator channel are two major ways to enhance the heat transfer efficiency of evaporator. After equipped with high efficiency fins on the airside or improving its air flow velocity, the heat transfer coefficient can be greatly improved but not without an upper limitation. Excessive air flow would cause weight loss to refrigerated goods and add loads to evaporator and draught fan as well. So improving the refrigeration coefficient on the refrigerator side turns out to be an energy-efficient solution. Accelerating refrigerant flow is the main step to enlarge heat emission coefficient on the refrigerant side, and compared with traditional refrigerant supplying type of direct expansion which is hard to control due to the fact that stable running of compressor in refrigerating system takes control of the circulation volume of refrigerant and that the supplied refrigerant is equal to the amount of evaporation. In consequence, by using air pump to supply refrigerant to improve its liquid measure in evaporator, the flow velocity of refrigerant can be accelerated with heat transfer performance strengthened, as a result of which, hyper refrigerant supply can be achieved, with the contact area of evaporating pipe expanded and the heat transfer efficiency improved. Constructing experiment table for air pump refrigerant sup