系统动力学建模软件的图形化实现-毕业论文(设计).docVIP

  • 9
  • 0
  • 约3.28万字
  • 约 47页
  • 2018-11-13 发布于广西
  • 举报

系统动力学建模软件的图形化实现-毕业论文(设计).doc

浙江大学硕士学位论文 STYLEREF 标题,章标题(无序号) \* MERGEFORMAT 摘要 PAGE ii 系统动力学建模软件的图形化实现 摘要 随着中国经济的不断发展,科技水平的不断提高,各个领域蓬勃发展的同时,所呈现出来的一系列复杂问题如城市发展与土地流失的关系,环境与公司企业之间的关系。这些系统动力学方面的问题都需要进行建模分析,这就势必要利用到易用且有效的建模软件来协助建模和分析这些问题。然而现在市场上的系统动力学建模软件几乎被国外公司所垄断,属于我国自己知识产权的系统动力学建模软件却寥寥无几。在全球化的背景下,如果能够开发出这么一款易用且功能丰富的系统动力学建模软件,将对我国系统动力学方面的发展有重要的意义。 因此,本课题基于系统动力学建模软件的研究,着重实现的目标是对系统动力学建模软件的功能进行分析,并分阶段实现图形化功能。本文的具体研究工作如下: 1.分析和研究系统动力学以及其现有图形建模软件的功能和特点。结合实际,实现基本的图形化建模功能。 2.在实际实现过程中,分析和研究了编译原理,并将此技术原理设计和实现在图形化实现的过程中。 3.分析和研究了时下的几种图形化相关技术(JUNG,JHotDraw,JGraph等)的特点,结合实际,选取JHotDraw应用于模型图形化的实现,并通过序列化对模型进行存储。 4.采用两种输出模式,分别是文本模式及图形模式。文本模式是以CSV(Comma Separated Value)格式输出的,每一行代表每个时间周期下的计算结果。图形模式是由JFreeChart生成的图形化折线图,能够直观的展现每个变量的变化。 关键词:系统动力学,图形化建模,JHotDraw,编译原理 浙江大学硕士学位论文 Abstract 浙江大学硕士学位论文 Abstract PAGE ii PAGE iii Abstract With the?continuous development of?Chinas economy, and?the continuous improvement of technological level,?while?the vigorous development of?various fields,?which?presented a series of?complex issues?such as?the relationship between urban?development and soil erosion, and the relationship between environment and?corporation.?These system dynamics issues need modeling and analysis, which?is bound to?take advantage of?easy?and efficient?modeling software?to assist in?modeling and?analysis of these?issues.?But now in the market, System Dynamics?Modeling Software?is almost monopolized by?many foreign companies,?intellectual property rights?belong to?our own?System Dynamics?Modeling Software?are?few.?Under the background of globalization, if we can?develop?such?a?System Dynamics?Modeling Software which is easy to use and feature rich,?this will have important?significance in the development of?our system?dynamics. Therefore, this topic based on the research of System Dynamics Modeling

文档评论(0)

1亿VIP精品文档

相关文档