《包头市昆都仑区北部地区交通需求预测及道路改造设计》-毕业论文.doc

PAGE 内蒙古科技大学 本科生毕业设计说明书 题 目：包头市昆都仑区北部地区交通需求预测及道路改造设计 学生姓名： 学 号：0863116237 专 业：交通工程 班 级：交通08-2班 指导教师： 摘 要 本次设计的课题是城市道路的规划与设计，课题内容经过老师悉心选择。设计内容主要是通过对石家庄市交通调查数据进行分析，采用四阶段法预测规划区道路的交通量分布情况，据此进行主要道路的横断面设计、纵断面设计、平面设计、典型交叉口的交通组织及竖向设计。 本设计主要分三部分，第一部分利用AutoCAD等软件，建立地理信息系统。将所选定的区域划分小区，利用四阶段法（出行生成、出行分布、出行方式划分和交通流分配）进行交通规划，然后根据石家庄市局部区域的道路交通量及社会经济等指标，对各个路段进行交通流分配而最终得到各路段上的交通量。 第二部分主要是结合现状，根据分配到路段上的交通量及道路功能、等级等，详细规划了道路平面、纵断面、横断面以及交叉口平面和竖向设计。 关键词：道路规划与设计 四阶段法 交通量 城市道路 Abstract This dissertation is the design of urban road planning and design, the subjects with our teacher carefully chosen. The main content of the dissertation is Shijiazhuang City traffic survey data analysis, four-stage prediction city traffic on the roads distribution, whereby the main roads in the cross-sectional design, profile design, graphic design, the typical traffic intersection organizations and vertical design. There are three parts in this design, the first part with the use of AutoCAD, Mapinfo software, establishes the geographic information system,and will be selected by the regional district, using four stages (trip generation, trip distribution. travel and transport mode distribution) traffic planning, According to Baotou City Local Area in road traffic and other socio-economic indicators, to all sections of the final distribution of traffic from all sections of the traffic volume. The second part is mainly with the status quo, according to the distribution of traffic on the section of road capacity and functional hierarchy. Detailed planed of the road plane, profile, and the intersection of cross-sectional plane and the vertical design. Key words:Road Planning and Design Four-stage Method traffic urban road 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc264448098 第一章 引 言 PAGEREF _Toc264448098 \h 1 HYPERLINK \l _Toc264448099 1.1 任务根据 PAGEREF _Toc264448099 \h 1 HYPERLINK \l _Toc264448100 1.2 设计要求 PAGEREF _Toc264448100 \h 1 HYPERLINK \l _Toc264448100 1.3 设计原始资料 PA