《12m×1m十字柱制作工艺》-毕业论文.docVIP

12m×1m十字柱制作工艺 w 第 PAGE 3 页 共 17 页 目 录 [摘要] 近年来，钢结构在中国正处于建国以来最好的一个发展时期。尽管我国钢结构工程以及钢结构工程用材的发展起步比较晚，但随着我国改革开放和经济建设的不断发展，钢结构在工程中也得到了迅速的发展。本文主要说明了焊接十字柱的一般制作流程和加工方法。 [Abstract] In recent years, the steel structure be be placed in to found a nation in China best of a development period.Though our country the steel structure engineering and steel structure engineering use a material of development start comparison night, along with our country reform open with economy construction of continuously development, the steel structure is in the engineering also got quick of development.This text was main elucidation to weld ten word pillars of general creation process with process a method. [关键词]十字柱，工序，制作 [Keyword]Ten-word column， HYPERLINK /working%20procedure/ working procedure，manufacture TOC \o 1-3 \h \z \u HYPERLINK \l _Toc118635945 1.引言 PAGEREF _Toc118635945 \h 3 HYPERLINK \l _Toc118635946 2.施工依据 PAGEREF _Toc118635946 \h 3 HYPERLINK \l _Toc118635947 3.制作材料 PAGEREF _Toc118635947 \h 3 HYPERLINK \l _Toc118635948 4.制作工艺要领 PAGEREF _Toc118635948 \h 4 HYPERLINK \l _Toc118635949 4.1 制作工艺流程 PAGEREF _Toc118635949 \h 4 HYPERLINK \l _Toc118635949 4.2 下料 PAGEREF _Toc118635949 \h 4 HYPERLINK \l _Toc118635950 4.3 H型钢组立 PAGEREF _Toc118635950 \h 5 HYPERLINK \l _Toc118635951 4.4 H型钢焊接 PAGEREF _Toc118635951 \h 8 HYPERLINK \l _Toc118635953 4.5 矫正工序 PAGEREF _Toc118635953 \h 8 HYPERLINK \l _Toc118635954 4.6 钻孔工序 PAGEREF _Toc118635954 \h 9 HYPERLINK \l _Toc118635955 4.7 T型钢剖分 PAGEREF _Toc118635955 \h 10 HYPERLINK \l _Toc118635956 4.8 摩擦面质量要求 PAGEREF _Toc118635956 \h 10 HYPERLINK \l _Toc118635957 4.9 十字柱焊接 PAGEREF _Toc118635957 \h 11 HYPERLINK \l _Toc118635958 4.10 大组立工序 PAGEREF _Toc118635958 \h 11 HYPERLINK \l _Toc118635959 4.11 成品检验 PAGEREF _Toc118635959 \h 11 HYPERLINK \l _Toc118635960 4.12 十字柱栓钉焊接 PAGEREF _Toc118635960 \h 13 HYPERLINK \l _Toc118635961 4.13 十字柱抛丸和涂装 PAGEREF _Toc118635961 \h 13 HYPERLINK \l _Toc118635962 4.14 钢构件产品标识 PAGEREF _T