《Mlodflow辅助设计打印机后盖注射模设计》-毕业论文.doc

摘要 模具作为工业产品生产用的重要工艺装备，在现代工业生产的规模中日益发挥着重大作用。通过模具进行产品生产具有优质、高效、节能、成本低等显著特点，因而在汽车、机械、电子、轻工、家电、通信、军事和航空航天等领域的产品生产中获得了广泛应用。近年来，塑料模具的产量和水平发展十分迅速，高效率、自动化、大型、长寿命、精密模具在模具产量中所占比例越来越大。注塑成型模具就是将塑料先加在注塑机的加热料筒内，塑料受热熔化后，在注塑机的螺杆或活塞的推动下，经过喷嘴和模具的浇注系统进入模具型腔内，塑料在其中固化成型，最终得到塑料产品。 本论文介绍了打印机后盖注射模设计过程。包括了塑件结构的分析和材料的选择、拟定模具结构形式、Moldflow模流分析、注射机型号的选择、热流道浇注系统的设计、成型零件的设计、模架的确定和标准件的选用、合模导向机构的确定、冷却系统的设计、脱模推出机构的确定、排气系统的设计、最后对注射机进行了校核。在设计过程中，使用了Moldflow软件对塑件进行了模流分析，以便确定最佳的浇口位置和对充填过程的分析，在分析数据的基础上再对模具设计进行优化和改进,提高了模具设计的质量，缩短了设计时间。 关键词：注塑模设计；注射成型；Mlodflow模流分析；热流道浇注系统 Abstract The mold as industrial products used in the production technology and equipment, play an increasingly significant role in the scale of modern industrial production. Through the mold, the production has a distinctive feature of high quality, efficient, energy saving, low cost, and therefore widely used in the production of automobiles, machinery, electronics, light industry, household appliances, communications, military and aerospace field. In recent years, plastic mold production and level of development is very rapid, efficient, automated, large-scale, long life, precision molds in the mold production, the proportion increasing. Injection mold plastic before adding in the heated barrel of the injection molding machine, the heat melted plastic in the injection molding machine screw or a piston driven by the nozzle and the mold gating system into the mold cavity, the plastic in which curing, the final plastic products. This paper describes the cover of the printer injection mold design process. Including the structural analysis of plastic parts and material selection, preparation of the mold structure, Moldflow mold flow analysis, the choice of models of the injection molding machine, hot runner gating system design, the design of molded parts, mold to determine the selection of standard parts, mold-oriented institutions to determine the design of cooling systems, the demoulding introduced institutions, exhaust system des