Integrated Electricity-Heat-Gas Modelling and Assessment, with Applications to the Great Britain System. Part II Transmission Network Analysis and Low Carbon Technology and Resilience Case Studies-学术期刊.pdf

Energy xxx (2018) 1e13 Contents lists available at ScienceDirect Energy journal homepage: /locate/energy Integrated electricity-heat-gas modelling and assessment, with applications to the Great Britain system. Part II: Transmission network analysis and low carbon technology and resilience case studies Stephen Clegg a, *, Pierluigi Mancarella a, b a School of Electrical and Electronic Engineering, University of Manchester, Manchester, M13 9PL, UK b Department of Electrical and Electronic Engineering, The University of Melbourne, Parkville, Victoria, 3010, Australia a r t i c l e i n f o a b s t r a c t Article history: With the increasing interactions between the heat, electricity and gas sectors due to the introduction of Received 17 January 2017 low carbon heating technologies, there is a need for models to assess the inter-sector interactions at a Received in revised form network level. This paper presents a novel integrated electricity-heat-gas transmission network model 27 December 2017 that considers electrical and gas network flows coupled with the fuel requirements for the heating sector. Accepted 17 February 2018 Available online xxx The latter is modelled at a nodal network level and on a half-hourly basis, building upon the high- resolution temporal and spatial heat demand model presented in Part I. In particular, here the model- ling is de