《基于基于ARM920T的S3C2440A单片机构成环境温湿度实时测控系统的研究》-毕业论文.docVIP

1 - l 编号 本科生毕业论文 基于ARM的数控冲床自动送料系统设计 ARM-based CNC punch automatic feeding system design 学 生 姓 名 专 业 学 号 指 导 教 师 学 院 二〇一三年六月 长春理工大学本科毕业论文 PAGE \* MERGEFORMAT I 摘 要 数控冲床送料系统主要用于与冲床实现配套，在冲孔过程中按照程序设定控制板料移动和冲床冲孔，实现冲孔的高度自动化。本文采用目前广泛使用的32位ARM微处理器，Samsung公司基于ARM920T的S3C2440A作为系统的主控制器，该处理器主要面向嵌入式设备，具有性价比高功耗低的特点，并且在嵌入式Linux操作系统下可移植性好，具有较强的控制能力和丰富的片内资源。该系统能实现数控冲床的自动送料，软硬件结构简单，定位精度高，操作简单方便，具有良好的人机界面。论文首先根据生产实际要求和控制系统设计原则，确定了送料系统的软硬件总体设计方案。 关键字：自动送料系统 嵌入式系统 ARM S3C2440 ABSTRACT Numerical control punch feeding system is mainly used to match with the punch,control the panel veneer to move and the punch to punch according to the settings of the programs in the process of punching, to achieve a high degree of automation of punching.In this paper, S3C2440A,(Samsungs ARM920T based controller),which is dely used as a 32-bit ARM microprocessor, is used as the main controller, the processor is manily for embedded devices which has a high cost-effective and low power consumption, its easy to migration in the embedded Linux operating system and has a strong control ability and rich chip resources.The system enables the machine to feed punching automatically, the structure of hardware and software is simple, and its easy to operate, the system has a high accuracy of positioning and good human-machine interface. The paper also introduces antijamming technology of the hardware and software of the system. Keywords：Automatic Feedingsystem Embedded System ARM S3C2440 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc359021543 摘 要 PAGEREF _Toc359021543 \h I HYPERLINK \l _Toc359021544 ABSTRACT PAGEREF _Toc359021544 \h II HYPERLINK \l _Toc359021545 目 录 PAGEREF _Toc359021545 \h I HYPERLINK \l _Toc359021546 第1章 前言 PAGEREF _Toc359021546 \h 1 HYPERLINK \l _Toc359021547 1.1嵌入式系统概述 PAGEREF _Toc359021547 \h 1 HYPERLINK \l _Toc359021548 1.2冲压生产自动送料装置的概况及发展趋势 PAGEREF _Toc359021548 \h 2 HYPERLINK \l _Toc359021549 1.3选题的背景和意义 PAGEREF _Toc359021549 \h 3