《脉动燃烧流场温度、压力动态测量》-毕业论文.docVIP

PAGE 本科毕业设计(论文) 题目： 脉动燃烧流场温度、压力动态参数的测量 学 院： 机 械 工 程 学 院 专 业： 过程装备与控制工程 班 级： 学 号： 学生姓名： 指导老师： 提交日期： 年 06月 17日 脉动燃烧流场温度、压力 动态参数的测量 摘 要 本论文提出脉动燃烧流场温度、压力动态参数的测量方法及结果分析。首先对比脉动燃烧和常规燃烧，分析脉动燃烧的优越性。介绍热电偶测量动态温度存在高温偏差和动态参数测量的局限性，采用三热电偶法修正高温偏差，双微细热电偶测量火焰动态温度，通过修正后能较准确得到动态火焰温度参数。介绍压电式和压阻式压力传感器测量动态压力的方法，通过两种方法的相互比较和相互修正，能更好的测量得到脉动燃烧流场动态压力参数，以便进一步分析讨论动态压力的特性。通过实验数据结果分析，可得到脉动燃烧具有效率高、节能环保等优点。 关键词：脉动燃烧；动态；温度；压力； The measurement of dynamic temprature and pressure in pulse combustion Student: Jianhua Yang Advisor: Prof. Yingjie Zhong Dr. Zangjian Yang College of Mechanical Engineering Zhejiang University of Technology Abstract This paper presents the measurement and results of dynamic temperature , pressure in pulse combustion. At first, the advantages of pulse combustion is analyzed by comparing the pulse combustion with conventional combustion. It shows that there are high temperature deviations and limitations of dynamic parameters measuring in dynamic temperature measuring by thermocouple. We can correct the high temperature deviations by using the three thermocouple method, and we can measure the dynamic temperature of flame by double fine thermocouple, and then we can get a more accurate dynamic temperature of flame after the correction. The measurement of dynamic pressure by using piezoelectric and piezoresistive pressure sensors is introduced. With the comparation and correction of the two measurement, we can better measure the dynamic pressure of the pulse combustion, and further analyze the characteristics of dynamic pressure. Through the analysis of the experimental data, we can see the pulse combustion saves energy, protects the envtironment and it’s efficient. Keywords: Pulse combustion; HYPERLINK javascript:; dynamic measurement; HYPERLINK javascript:; temperature; pressure; 目 录 HYPERLINK \l _Toc263995255 中文摘要 ⅰ HYPERLINK \l _Toc263995255 英文摘要 ⅱ HY