《加工中心刀柄结构说明》-精选课件.pptVIP

Tool Holders/刀夹系统 In the system of spindle + tool holder + cutting tool, the tool holder is the link that has the most effect on overall concentricity and balance. Don’t think of it as commodity hardware. As spindle speed increases, the choice of tool holder has more impact on process effectiveness 在主轴+刀柄+刀具这样的一个系统中，刀柄是影响同心度和动平衡一个关键环节，千万不能将它当成一般的部件来看待。随着主轴转速的增加，刀柄的选择对于加工的影响将显得越来越重要。 Two Face Contact HSK holders/两面接触HSK刀柄 Centrifugal force from fast spindle speeds can cause the tool holder to retract when the spindle and holder touch only along the taper. Two-face contact at the spindle inte