[精品]东芝BIOS设置图解教程.docVIP

. InsydeH20 setup utility Rev.3.5 InsydeH20 的安装实用程序 Rev.3.5 [main] 主要 System time 系统时间；Help: enter selects field： 帮助： Tab选择字段 System date 系统日期；Help: enter selects field： 帮助： Tab选择字段 Language 语言帮助： 选择语言/enter/enter [security] 安全 User password 用户密码； Help: Set delete or change the user password 帮助: 设置删除或更改用户密码 Supervisor password 监督人密码 Help: Set delete or change the supervisor password 帮助: 设置删除或更改监护人密码 HDD1/SSD1 password startus not registered ； HDD1/SSD1 密码 startus 未注册 HDD1/SSD1 password mode [User only][user + master] ；HDD1/SSD1 密码模式 [用户仅] [用户 + 主] Help: Select the HDD1/SSD1 password mode；帮助: 选择 HDD1/SSD1 的密码模式 User HDD1/SSD1 password [enter] ；HDD1/SSD1 的用户密码 [进入] Help: Set delete or change the user HDD1/SSD1 password；帮助: 设置删除或更改用户 HDD1/SSD1 密码 [power management] [权限 管理] Wake-up on LAN [Disabled][Enabled] ； 在局域网唤醒 [禁用] [启用] Help: Let the computer’s power be turned a wake-up signal from the LAN 帮助： 让计算机的电源打开从 LAN 唤醒信号 Wake on keyboard [Disabled][Enabled] ； 唤醒键盘 [禁用] [启用] Help: Let the computer’s power on by pressing any key, then PC is in sleep 帮助： 让计算机的电源任何按键然后 PC 处于睡眠状态 Critical Battery Wake-up [Disabled][Enabled]；关键电池唤醒 [禁用] [启用] Help: Resume from standby automatically when Battery capacity become critical level. 帮助：电池容量成为关键级别时自动恢复从待机状态。 Dynamic CPU Frequency Mode[Dynamic Switch] [Always Low] 动态 CPU 频率模式 [动态开关] [始终低] Help: Configure the power saving modes associated with the processor. [Dynamic Switch] The processor’s power consumption and automatic clock speed switching functions are enabled. [Always Low] The processor will always run at a lower level of power consumption and a low speed. 帮助: 配置节能模式与处理器相关联。 [动态开关] 启用处理器的功耗和自动时钟速度切换功能。 [总是低] 该处理器将始终运行在较低级别的功耗和较低的速度。 Core Multi-Processing [Enabled] ；核心 Multi-Processing [启用] Help: Enable processor cores；帮助： 启用处理器核心 eSATA [Enabled]；eSATA [启用] Help: Let the e-SATA port disabled in order to save power.；帮助： 让 e SATA 端口禁用，以节省电源。 SATA Interface Setting [Performance] [Battery life