《支承块（2262161）零件工艺工装设计》-毕业论文（设计）.doc

本科生毕业设计（论文） PAGE PAGE 2 摘 要 本论文的题目是支承块（2262161）零件工艺工装设计，题目来源于锦州双羊双凌精密铸造公司。根据该公司的生产能力和设备情况，设计完成了零件的熔模模具、零件的工艺规程及专用夹具。 本设计内容涉及到零件的实体造型，模具的设计，加工工艺规程的制定，机床夹具的设计。本设计中的三维实体造型、模具设计和机床夹具设计用Pro/E完成。根据设计要求，在分析了零件的结构特点后利用Pro/E完成零件的实体造型，然后确定分型面，浇注系统，定位锁紧机构的设计等完成模具设计，并对模具的开模过程进行仿真，检查开模过程中的干涉现象。在模具组件的合理设计之后，利用ＣＡＸＡ绘制二维装配图，制定工艺规程时，在保证零件加工质量的前提下选择合适的机床以提高加工效率，降低消耗，减少成本，取得较好的经济效益。夹紧方式采用移动压板，夹紧可靠，适用于大批量、流水线上加工。因此，在后续加工中需要使用专用夹具，主要采用HAAS加工中心 MINI MILL，铣床，摇臂钻床，即能顺利地完成加工，很好的保证加工精度和生产效率。设计过程中所有二维装配图和工艺规程图的绘制用CAXA完成。 综上，本论文以零件工艺工装设计理论为依据，进行了支承块（2262161）零件的熔模模具和工艺工装设计的实际应用。 关键词：；三维实体模型；模具设计；工艺；夹具； Abstract The paper is entitled bearing block (2,262,161) parts technology and equipment design, the title comes from the double-Ling Yang Jinzhou double precision casting company. According to the companys production capacity and equipment, designed to complete the parts of the melting mold, part of the technical rules and special fixtures. 　　The design relates to the part of solid modeling, mold design, process planning development, machine tool fixture design. The design of the three-dimensional solid modeling, mold design and machine tool fixture design using Pro / E to complete. According to design requirements, the analysis of the structural characteristics of the parts after the use of Pro / E solid modeling of parts to complete, and then determine the sub-surface, casting systems, the design of locking mechanism positioned to complete the mold design, mold and mold process simulation, check the mold during interference. The rational design of components in the mold, after drawing two-dimensional assembly drawings using CAXA to develop process planning, in ensuring the quality of parts processed under the premise choose the right tools to improve processing efficiency, reduce consumption, reduce costs, achieve better economic benefits. Clamping using mobile plate, clamping and reliable, suitable for high-volume, assembly line processing. Thus, in subsequent processing requires special