《智能水温控制系统》-毕业论文（设计）.doc

PAGE 2007级物理与电子信息工程系 2011328电气工程及其自动化 0710617140智能水温控制系统 2007级 物理与电子信息工程系 2011 3 28 电气工程及其自动化 0710617140 智能水温控制系统 智能水温控制系统 摘 要 本文主要介绍了利用单片机实现温度控制系统的设计过程，在系统构建时选取了SPCE061A芯片作为该控制系统的核心。由温度传感器DS18B20提供温度信号，SSR固态继电器作执行部件，实现对电炉水温的控制。本次设计还充分利用了SPCE061A单片机成熟的语音处理技术，实现了语音播报温度的要求。同时该系统具有灵敏的温度感测和显示功能，采用八段数码管进行动态扫描显示，可由用户通过按键设置上下限温度值。测得温度值小于所设定的下限温度值时自动执行加热装置，直至温度超过上限温度值时自动断开加热装置，而温度降至在上下限温度之间时无动作，控制准确灵活，性能稳定。 关键词：SPCE061A单片机；温度传感器DS18B20；数码管 Abstract This paper describes the use of single chip design process temperature control system, built in the system when selected SPCE061A chip as the core of the control system. DS18B20 by a temperature sensor provides temperature signals, SSR solid state relays for the implementation of components, to achieve the furnace temperature control. This design also takes advantage of sophisticated voice processing SPCE061A microcontroller technology to achieve the temperature requirements of voice broadcast. While the system is sensitive to temperature sensing and display functions, with eight out of dynamic digital scanning display set by the user through the keys on the lower temperature. Measured temperature value is less than the minimum set automatically when the temperature heating device until the temperature exceeds the upper limit temperature automatically disconnected when the heating device, and the temperature dropped to between the upper and lower temperature when no action, control is accurate and flexible, Stable performance. Key words：SPCE061A SCM; Temperature Sensor DS18B20; LED 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc289090841 摘 要 PAGEREF _Toc289090841 \h III HYPERLINK \l _Toc289090842 Abstract PAGEREF _Toc289090842 \h IV HYPERLINK \l _Toc289090843 1 引 言 PAGEREF _Toc289090843 \h 1 HYPERLINK \l _Toc289090844 2 方案设计与论证 PAGEREF _Toc289090844 \h 2 HYPERLINK \l _Toc289090845 2.1 设计要求 PAGEREF _Toc289090845 \h 2 HYPERLINK \l _Toc289090846 2.1.1 基本功能 PAGEREF _Toc289090846 \h 2 HYPERLINK \l _Toc289090847 2.1