《无线网络教学资料》r-ch3--pd_思科无线网络设计--site_survey_base_ap幻灯片资料.pptVIP

无线网络设计及部署;Protocol requirements 802.11b/g 802.11a Client devices WNIC PDA Phone Client density Typical Peak Expected throughput 802.11b is typically 2 Mbps 802.11g is typically 11-14 Mbps 802.11g is typically 2-4 Mbps with 802.11b clients presents 802.11a is typically 11-14 Mbps;协议比较;Coverage Areas Full or partial Coverage Hole Goal 0% - 10% (Typically 2% – 5%) Building Construction Type Typical Offices (cubes and walled offices) Walled Offices (drywall office only) Walled Offices (brick and concrete walled offices) Other (example arenas, stock exchange, convention center, large warehouse) Building Characteristics Homogeneous – same construction type throughout Cubes and walled offices throughout and/or floor to floor Heterogeneous – mixed construction types Drywall office area with shipping warehouse in back;部署需求障碍物考虑;部署需求提问;部署需求AP摆放;企业无线网覆盖和容量;企业无线网策略;确定AP数量和位置Z Factor ;Increased signal strength means greater throughput limited by signal standard 802.11a will have increased throughput over a wider range than 802.11b;Z FactorBuilding Reference;Z FactorAP 数量;Z FactorAP 位置;确定AP数量和位置Site Survey;Site SurveyOverview;Site SurveyCisco 1000 series AP Site Survey Mode;Site SurveyCisco 10xx series AP Site Survey Mode (continued);Site SurveyCisco 10xx series AP Site Survey Mode (continued);Site SurveyAP 数量和位置;Site SurveyAP 数量和位置 (continued);Site SurveyAP 数量和位置 (continued);VerificationEkahau Site Survey Tool;接受信号强度(RSSI)