工业纯铁和纯铝电极材料的表面改性研究-材料加工工程专业论文.docx

Ab Abstract PAGE III PAGE III 万方数据 Abstract Stainless steel has been widely used as a metal electrode material for its excellent corrosion resistance and electrochemical corrosion resistance. But, the dense, continuous and compact chromium oxide films could be generate during the using process, which has the disadvantages of poor electrical conductivity. For electrochemical industries, this disadvantages brought the rapid increase of electricity consumption and made the enterprise production cost increase, in addition, the price of stainless steel was about several or dozens times as high as carbon steel. The price of Industrial pure iron or mild steel material was cheap, but they had bad corrosion resistance, low hardness and short service life; as metal electrode materials, commercial-purity aluminium also had the weaknesses as like as stainless steel, and less-than-ideal hardness and ware resistance. Therefore, improve and enhance the operational performance of industrial pure iron and pure aluminum electrode material through surface modified technique, has definite value to engineering application, and practical significance to cheaper production costs for enterprises at the same time. In order to enhance and improve industrial pure iron and pure aluminum performance, this paper used the double glow plasma surface alloying and multi-arc ion plating technique to handle them. Especially Mo-alloyed layer was prepared on pure iron by double glow plasma surface alloying which pioneered a new and innovative electrode materials. This paper puts emphasis on the study and analysis of the impact of process parameters of ion-molybdenumizing by double glow plasma on the alloy diffusion layer thickness, the organization, structure, hardness, composition distribution, electrical properties, corrosion resistance and abrasion resistance of Mo-alloyed layer and Titanium nitride coating. The results obtained are as follows: The test results of Mo-alloyed layer was prepared on s