浮石混凝土多孔承重墙板试验研究-结构工程专业论文.docxVIP

Abstract As the clay brick of our country is forbidden gradually, one kind of new wall is positively sought in order to suffice for construction developing constantly. Pumice is an ideal natural lightweight aggregate, the lightweight aggregate concrete made in it has some virtues such as lightweight, heat-insulation, adiabatic. The area of Inner Mongol contains a great quantity of pumice resources, if we can rational utilize it, this will play a positive push role in the construction of our district. This text carries on research to the pumice of the area of Xi lin Hot. First of all, we have tested the main physical and mechanical performance of pumice and pumice concrete, and then we made 22 pumice concrete porous bearing wallboards, and carry on preliminary experimental study to its physical and mechanical performance. The trial results show: Main physical performance of the pumice in the area of Xi lin Hot, for instance packing density, apparent density, tube strength, water absorption, porosity, soften coefficient etc, according with the demands for “Lightweight aggregate test method”GB/T17431.1-1998. The compressive strength of the pumice concrete has reached low grade CL20 the most that the structural lightweight aggregate concrete required. The line sexual relations between axial compressive strength and standard compression strength of pumice concrete is fck = 0.93 fcu . The stress-strain curve of the pumice concrete is basically similar to the ordinary concrete, but some extent differences, under the same intensity grade terms, the ascending stage of the curve of the pumice concrete is more steadily. The elastic modulus of the pumice concrete is lower than the ordinary concrete. The basic physical performance of pumice concrete could meet the demands for “Lightweight aggregate concrete technical regulation” JGJ51-2002. Through analyzing about the trial results of mechanical performance of pumice concrete porous bearing wallboard that shows: the theory calc