不锈钢还原碴含量对红砖工程性质之影响.PDF

不銹鋼還原碴含量對紅磚工程性質之影響 防蝕工程　第㆓十卷第㆔期　第287 〜292 頁　2006 年9 月 Journal of Chinese Corrosion Engineering, Vol. 20, No. 3, pp. 287~292 (2006) 不銹鋼還原碴含量對紅磚工程性質之影響 沈永年* 、林仁益、盧俊文 Engineering Properties of Bricks Made from SSRS Yeong-Nain Sheen*, Ren-Yih Lin, Jiunn-Wen Lu 由於冶煉不銹鋼時，需使用生石灰、焦炭等副料，導致不銹鋼還原碴含大量的 CaO 與 SiO2 等成分。本研究係探討不銹鋼還原碴與黏土混合燒製成建築用紅磚之可行性，期能 有效降低 CaO 之體積膨脹問題，並提供不銹鋼還原碴之更佳處理方法。研究結果顯示，以 黏土添加 12.5%以㆘還原碴粉，經 800 °C 溫度燒結後可製成㆓級磚，其吸水率及抗壓強度 分別為18.9% 、250 kg/cm2 ；以黏土添加25 至50%還原碴粉，經800 °C 溫度燒結後可製成 2 ㆔級磚，其吸水率及抗壓強度分別為23% 、150 kg/cm ，皆符合CNS 3319-R143 規範之品 質要求。 關鍵詞：還原碴；燒結；磚。 ABSTRACT Stainless steel reducing slag (SSRS) is the by-product of stainless steel plant. SSRS containing large amount of CaO and SiO2 . The combination of both SSRS and the clay by employing the fired technology can lead to not only solved the storage problem of SSRS but also is converted into building materials. From the study resulted that the amount of SSRS for brick making is 12.5% that met for second-class quality brick, the water absorption and compressive strength, 18.9% and 250 kg/cm2, respectively. When SSRS content from 25% to 50% that met for three-class quality brick, the water absorption and compressive strength, 23% and 150 kg/cm2, respectively. Both conform to the requirement of CNS 3319-R143. Keywords: SSRS; Fired; Brick. ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ 國立高雄應用科技大學土木工程與防災科技研究所 Department of Civil