三维表面形貌仪测皮革表面粗糙度新.pdfVIP

Processed Leather Surface Finish Using 3D Profilometry Prepared by Craig Leising 6 Morgan, Ste156, Irvine CA 92618 · P: 949.461.9292 · F: 949.461.9232 · Todays standard for tomorrows materials. © 2014 NANOVEA INTRO: Once the tanning process of a leather hide is complete the leather surface can undergo several finishing processes for a variety of looks and touch. These mechanical processes can include stretching, buffing, sanding, embossing, coating etc. Dependent upon the end use of the leather some may require a more precise, controlled and repeatable processing. IMPORTANCE OF PROFILOMETRY INSPECTION FOR RD AND QUALITY CONTROL Because of the large variation possible, and unreliability of visual inspection, the surface finish of leather should be properly inspected for quality control. Understanding surface features can lead to the best selection surface finish and control measures. To insure the quality control of such parameters, inspection will heavily rely upon quantifiable, reproducible and reliable information. The Nanovea 3D Non-Contact Profilometers utilize chromatic confocal technology with unmatched capability to measure finished leather. Where other techniques fail to provide reliable data, due to probe contact, surface variation, angle, absorption or reflectivity, Nanovea Profilometers succeed. MEASUREMENT OBJECTIVE In this application, the Nanovea ST400 is used to measure and compare the surface finish of 2 different but closely processed leather samples. Several surface parameters will be automatically calculated from the surface profile. Here we will focus on surface