fealal 2o 3陶瓷基复合材料的凝胶注模成工艺研究.docxVIP

优秀毕业论文 精品参考文献资料 坯体的抗弯强度，并分析了影响其性能的因繁和机理。实验结果和显徽结构分析 表明：高露相含量浆料可浇注各种复杂器件，所褥坯体强度高(89MPa)、组织 结构均匀。 在Fe．灿／A1203复合材料中，随着Fe．础含量的增加，浆料粘度变大，固相含 量减小，也使粉料的分数变得豳难。但是坯体强发不与。烈的含量成正比，当 Fe-AI的含量灸10％时，所褥坯体结构均匀紧密。 关键词：Fe-AI／A1 20。；复合材料；金属间化台物；凝胶注模成型  Study on Ge I cast i ng Form i ng Process of Fe—A I／A I 203 Compos ite Abstract Fe-AI／A1203 composite is a material which is compounded by A12％as matnx and iron-aluminized豁toughnessing and strengthening phase．Ceramic strengthened and toughnessed by iron—aluminized don’t have the disadvantage of which by fiber, whisker and metallic grain。It shows the advantage of iron-aluminized as semi—ceramic material that it has good consistence、旃m alumina． Now the major method of the preparation of Fe-A1／A1203 composite is mechanical alloying and pressing sintering。First of all，the Fe*AI inter-metallic compounds powder is prepared bY mechanical alloying．And it is mixed with alumina． The mixed powder is formed by pressing sintering．This forming method is easy，but it Call’t be used in complex formation。The sintering parts need later machining and this increases production cosL The forming process of gel—casting of Fe-A1／A120a composite WaS provided， wherein,slurry of composite powder in good dispersion WaS casted in a modd with the organic system，which could be caused the polymerization and made the slurry in-situ formation．This process can promise the uniformity ofthe powder dispersion， which also gave the green body in hi酶strength。Further,the process is optimized by decreasing the amount of organic substances SO that a large amount of time Was saving for giving away the organics。 The Fe—A1 inter-metallic compounds powder is prepared by mechanical alloying and sintering．The best techniques are the ball milling time iS 40h and the holding time is 2h at 750℃． For the糙qmrement of in·situ forming and machining process，the solid content of slurry more than 50％(by volume)is needed。Otherwise，the critical point is to obtain thick suspension in good fluidit