基于STM32的乳腺X线机控制系统的研究-控制工程专业论文.docxVIP

Abstract The common breast diseases mainly include the following four categories: Breast congenital malformations, inflammatory disease of Mastitis, Breast hyperplasia and cystic hyperplasia disease, Disease of breast tumor and so on. In these four categories of breast disease, the greatest threat to human health is the malignant tumor-Mammary cancer, mammary cancer is one of the most common malignant tumors in women, the incidence of mammary cancer accounts for the entire 6-11% in a variety of malignant tumors, and it has become the main cause of threat to womens health. Around the world each year about 1500000 people are diagnosed with mammary cancer, about 600000 people die of the disease. In the past 20-30 years, X-ray photography of breast has become the most sensitive technology that detection of breast diseases that can not be touched , at present more and more hospitals of domestic have introduced X-ray equipment of breast。 Mammography is the most simple, the most reliable machine of detection, its main function is to produce the X-ray image, record and analysis the image, so that detect and diagnose of breast disease, if use mammography to achieve X-ray image that the pain is relatively light, and the image is high resolution, good repeatability that image that taken Can be contrasted, and you also needn’t to consider the age and size. According to the function will be achieved by mammography, the paper designed a control system of breast machine, this system consists of four parts, the main control part, display part, pressure acquisition part, PC part, wherein, the first three parts, are introduced in this paper, including its hardware structure, software design, selection and peripheral device, are introduced in detail, and PC part is rough introduced according to its function. In the whole system, the main control part is the core part, leading the global, it not only dominates all the peripheral devices, including the stepper motor,