ContractorContro中lonEHSTraining20100721.pptVIP

1 World-class Printed Circuit Board and Flexible Circuit Manufacturer Contractor Control on EHS Training | July 2010 Prepared By: EHS Department CONFIDENTIAL | Copyright ?2008 Multek Corporation. All rights reserved. 1.供应商环境健康安全管理的目的及范围……………………………….3 Objective and Scope -----------------------------------------------------------------------side 3 2.供应商入厂作业环境健康安全指导文件……………………………….4 EHS Procedure for Contractor’s Working in Multek---------------------------------side 4 3. 接待部门的职责………………………………........................................12 Responsibility of Reception Department-----------------------------------------------side 12 4.供应商注意事项………………………………………………………….13 Attention for Contractor --------------------------------------------------------------------side 13 5. EHS及行政部门的职责………………………………...........................24 Responsibility of EHS and ADM Department-----------------------------------------side 24 目录 Content 1.供应商环境健康安全管理的目的及范围 Objective and Scope 目的/Objective 规范供应商的环境健康安全管理，确保其在公司范围内的活动符合法律法规和公司内部的要求，以控制或消除相关环境健康安全风险。 Making contractor’s EHS management standardization, and ensure they comply with requirements of legal and Multek, to control or avoid EHS related risk. 范围/Scope 进入 Multek 所有厂区或厂房内进行施工作业。 Come into Multek for construction work in all area. 定义/Definition： 施工作业/Construction Work：土建工程施工、起重作业、叉车作业、动火作业、高空作业、有限空间作业、设施设备安装、调试、维修、保养、检测和改造、电气线路（包括网线、电话线）和设备线路的维修、检修、安装等。（饮用水、电脑、打印机等小型日常办公设备除外。）building construction, lifting work, forklift work, hot work, high work, confined space work, facility and equipment fixing, debugging, maintenance, test and reconstruction, the ?maintenance, testing and fixing of ?the electrical wire (including web line and telephone line) and the equipment connection. (except mini-type daily work equipments including drinking water, computer, printer etc.) EHS程序文件/EHS Procedure 《供应商环境健康安全管理程序/Supplier Management on EHS》 EHS-SCP-001 根据上述文件规定，供应商入厂服务期间必须在指定时间、指定服务区域内进行指定施工内容，并认真了解安全规定，否则有可能导致警告、罚款，甚至取消资格的处罚。 According