提高Φ55mmER70S-6焊丝钢盘条拉拔性能的-中国科技论文在线.PDFVIP

____________________________________________________________________________ 提高Φ5.5mm ER70S-6 焊丝钢盘条拉拔性能的工艺研究 北京科技大学 刘雅政 王建林 酒泉钢铁公司 史光亮 李定义 贾晔 摘要 在热模拟实验的基础上,依据大量的现场实验结果和实测数据,在配置有标准的斯太尔 摩控冷线的酒钢高速线材生产线上,通过分析不同的轧制温度、终轧温度、吐丝温度和 冷却速度下盘条的组织结构、性能特点。结果表明,微观组织均匀是改善盘条拉拔性能 的重要因素之一。提出了一个有效的工艺,轧制了1300多吨盘条,其拉拔性能得到明显 的改善, Φ5.5mm的盘条可一次拉拔到Φ1.2mm,有些到Φ0.8mm,不需中间退火。与德 国同类盘条进行了对比,从盘条的微观结构和力学性能接近。 关键词: 焊丝钢,控轧控冷,微观组织,拉拔性能 Experimental Investigation of Processing for Improving Draving Quality of Welding Wire Steel Liu Yazheng Wang Jianlin Faculty of Metal Forming .Beijing Science and Technology University .Beijing 100083. China Shi Guangliang Li Dingyi Jia Yie Jiuquan Iron and Steel Company. High-Speed Wire Factory. Jiayuguan Gansu 735100.Chin Abstract: Basing on the thermal simulation test to the hot rolling and colling,according to lots of measured data from the working yard,the controlled rolling and cooling technique for welding wire rod,ER70S—6, in high-speed wire rod rolling mill with standard Stelmor controlled cooling line of Jiuquan Iron and Steel Company has been researched. By analyzing the effects of the different rolling temperature, final temperature , laying head temperature and different rate of cooling on microstructure and macroscopic properties of the rolled wire, the experimental results show,the uniformity of the microstructure is one of the main factors that affects the drawing quality. The available process of the welding wire rod controlled rolling and cooling has been given, more than 1300 ton welding wire has been produced by this controlled rolling and cooling technique, the drawing quality of the welding wire has b