[综合布线]-r5.1__双都绞线链路测试及故障处理方法.pptVIP

HDTDR 3,6线对回波损耗不合格，HDTDR显示在23.2米处特性阻抗有不连续现象 * * * * * * * * * * * * * * * * * * * In this example, we see a peek of 48% at 1 meter. In this example, our test lead is 1 meter, so we know this peak represents the connection to the patch panel. Using the table below, we can see that, 48% represents 44.3 dB @ 100 MHz, that’s almost 10 dB worse than the Category 6 connecting hardware standard (54 dB). The remote connection at 36 % is better although does no meet the desired 29-30%. As a rule, less than 35% will result in an acceptable pass for the link under test. Values highlighted in yellow repre