eda工具软件接口没有幻灯片标题.pptxVIP

第11章 EDA工具软件接口;11.1 EDA 软件接口流程;11.2 Synplify与MAX+plusII的接口;图11-3 Synplify新建项目对话框;3. 综合前控制设置;图11-5 Synplify的综合后门级电路图;【例11-1】 library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; entity cnt4 is port (d : in std_logic_vector (3 downto 0); ld, ce, clk, rst : in std_logic; q : out std_logic_vector (3 downto 0)); end cnt4; architecture behave of cnt4 is signal count : std_logic_vector (3 downto 0); begin process (clk, rst)　 begin if rst = 1 then count = (others = 0); elsif rising_edge(clk) then if ld = 1 t