转向夹送辊设计说明书.docVIP

PAGE PAGE 25 摘 要 向夹送辊可分为平送斜出和斜送平出两种类型。从基本工作原理出发建立了 斜送平出式转向夹送辊的力学模型，利用弹塑性弯曲变形理论推导出上下夹送辊半径比、偏移距、偏移角以及实际咬入角的定量计算公式，实例计算结果与国外进口设备吻合，为今后该类装置的自主设计提供了有益的参考。 关键词: 转向夹送辊 偏移角 咬入角 弹塑性弯曲变形 ABSTRACT : Here are two types of steering withdrawal roll inproduction．Which are horizon entrance with declivity with draw and declivity entrance with horizon withdraw．In this paper．mechamical model was established on base of the basic principle of operation of steering withdrawal roll with declivity entrance and horizon withdraw．In virtue of the elastic and plastic bending deformation theory quantified calculating