Q_ASTM A578-2017特殊用途用普通钢板和复合钢板直射法超声检验标准规范.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A578/A578M − 17 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications1 This standard is issued under the fixed designation A578/A578M; the number immediately following the designation indicates the year 公 of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. 开 A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the U.S. Department of Defense. 2 0 1 8 1. Scope* 年 2. Referenced Documents 2 1 3 0 2.1 ASTM Standards: 1.1 This specification covers the procedure and acceptance 月 A263 Specification for Stainless Chromium Steel-Clad Plate standards for straight-beam, pulse-echo, ultrasonic examina- 2 3 5