Q_ASTM A956-2017钢产品里氏硬度标准试验方法.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A956/A956M − 17a Standard Test Method for Leeb Hardness Testing of Steel Products1 This standard is issued under the fixed designation A956/A956M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope* E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods 1.1 This test method covers the determination of the Leeb hardness of steel, cast steel, and cast iron (Part A), including E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method the methods for the verification of Leeb hardness testing instruments (Part B), and the calibration of standardized test 3. Terminology blocks (Part C). 3.1 Definitions: NOTE 1—The original title of this standard was “Standard Test Method