Q_ASTM A1038-2017超声波接触阻抗法便携式硬度仪测试硬度的标准作法.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A1038 − 17 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method1 This standard is issued under the fixed designation A1038; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope* E384 Test Method for Microindentation Hardness of Mate- rials 1.1 This test method covers the determination of compara- tive hardness values by applying the Ultrasonic Contact E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method Impedance Method (UCI Method). 1.2 The values stated in SI units are to be regarded as 3. Terminology and Equations standard. No other units of measurement are included in this standard. 3.1 Definitions: 1.3 This standard does not purport to address all of the 3.1.1 calibration—determination of the specific values