Q_ASTM E110-2014便携式硬度仪测试金属材料压痕硬度的标准方法.pdf

Designation: E110 − 14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers1 This standard is issued under the fixed designation E110; the number immediately following the designation indicates the year of 公 original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A 开 superscript epsilon (´) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the U.S. Department of Defense. 2 0 1 8 1. Scope* 年 1.6 Annex A1 is included that defines the periodic indirect 1 verification and daily verification requirements for these instru- 0 1.1 This test method defines the requirements for portable 月ments. instruments that are intended to be used to measure the 2 5 1.7 This standard does not purport to address all of the Rockwell or Brinell hardness of metallic materials by perform- 日 ing indentation tests on the surface of materials in the field or safety concerns, if any, associated with its use. It is the