磁电机罩塑料模具毕业设计..docVIP

磁电机罩塑料模具设计 摘 要 本次设计完成了对注塑模具的总体结构设计以及各个零件的结构设计。 本次设计是对磁电机罩进行塑料模具设计。通过对磁电机罩的工艺特性和模具制造材料的分析，了解磁电机罩的生产技术要求，结合模具的制造工艺性以及对各种塑料模具成型工艺的对比，确定对其采用注塑模具设计。在设计过程中主要分析塑件的成型工艺性能，塑件在注塑模具中的成型位置、模具成型零件的尺寸计算、分型面选择的合理选择、浇注系统的设计、推出机构的设计、脱模机构的设计以及导向机构的设计等，再根据设计出的各个机构尺寸选用注塑成型设备以及对注塑成型设备的校核，最终以确保制造出的塑件满足使用要求。 关键字：磁电机罩，注塑模具，机构设计，注塑设备 MAGNETO BOOT PLASTIC MOLD DESIGN ABSTRACT This design has completed the injection mold overall structural design as well as each components structural design. This design is carries on the plastic mold design to the magneto boot. Through to the magneto boot craft characteristic and the mold manufacture material analysis. Magneto cover understanding the technical requirements of production, combined with the manufacturing process dies and molds for various plastic forming process of the comparison, to determine their use of injection mold design In the main analysis of the design process of molding plastic parts process performance, injection mold plastic parts in the molding position, the size of parts forming mold, the surface of a reasonable choice to choose, the design of gating system, the introduction of institutional design, Demoulding Design and design-oriented institutions, designed in accordance with the size of the various agencies as well as the selection of injection molding equipment, injection molding equipment to check, and ultimately to ensure that the manufacture of plastic parts to meet application requirements. KEY WORDS: Magnet boot, Injection mold, Organization design, Injection equipment 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc231606555 前 言 PAGEREF _Toc231606555 \h 1 HYPERLINK \l _Toc231606556 第一章 塑件的工艺分析 PAGEREF _Toc231606556 \h 3 HYPERLINK \l _Toc231606557 1.1 分析塑件的尺寸、公差和表面质量 PAGEREF _Toc231606557 \h 3 HYPERLINK \l _Toc231606558 1.1.1 塑件的尺寸 PAGEREF _Toc231606558 \h 3 HYPERLINK \l _Toc231606559 1.1.2 塑件的公差 PAGEREF _Toc231606559 \h 4 HYPERLINK \l _Toc231606560 1.1.3 塑件的表面质量 PAGEREF _Toc231606560 \h 4 HYPERLINK \l _Toc231