《基于MCGS工业实时监控系统的开发(本科)》-毕业论文.DOCVIP

PAGE 1 摘 要 在现代工业控制中，中央监控功能已被广泛应用，而实现这一功能就是组态软件与控制系统软、硬件有机结合。本课题以MCGS组态软件、MCGSTPC触摸屏及OMRON的CPM2A型PLC实体为对象，实现MCGS组态软件和欧姆龙PLC上的通讯单元建立串行通讯连接，从而达到在触摸屏上操作PLC设备以及同步显示PLC当前状态的目的；研究特殊模块的使用方法，实现模拟量（Analog）和数字量（Digital）之间的A/D转换及D/A转换，并对具体过程进行控制以及实现数据采集，对其处理方法提供可参考数据与程序。 本课题完成的主要工作： 实现MCGS组态软件和硬件设备（OMRON PLC、MCGSTPC 触摸屏）的串行通讯连接； 利用MCGS组态软件和PLC的组态通信连接，实现触摸屏对交通信号灯系统现场的实时监控及同步模拟显示功能； 利用MCGS组态软件和PLC的组态通信连接，通过控制变频器实现触摸屏对电动机起动、制动、正转、反转、变频调速等控制； 4）利用Modbus协议实现控制器相互之间和其它设备之间的通信； 5）系统控制部分均在MCGS连机运行环境上进行功能操作。 关键字：可编程逻辑控制器，组态软件，MCGSTPC，Modbus协议 Development of Configuration Software on Industry Real-time monitoring system ABSTRACT In modern industrial control, the central monitoring are the basic functions, and to implement this function we need the configuration software and control system software and the organic combination of hardware. Subject to the configuration software MCGS and touch screen MCGSTPC and OMRONs PLC-based entities CPM2A targeted implementation MCGS Omron PLC configuration software and the communication on serial communication connectivity units set up to achieve the operation of PLC showed that PLC equipment and sync the purpose of the current status in touch screen MCGSTPC; Research on the use of special modules, analog implementation and Digital between the A/D conversion and D/A converter, and the specific process control and data acquisition, methods of treatment available for their reference data and procedures. The main work of this paper followes as: 1）To implement communication connectivity between MCGS configuration software and hardware devices (OMRON PLC、touch screen MCGSTPC). 2）Using configuration software MCGS and configuration of the PLC communication connection at the scene of the traffic signal system control and synchronization of real-time analog display. 3）Using configuration software MCGS and configuration of the PLC communication links, by controlling the frequency converter to achieve motor starting, braking, are transferred, such as