重介旋流器运行手册..doc

Rev 00 重介旋流器操作手册 客户订单号: IM 旋流器型号: MAX800-20-1/AB 宏测项目 北京华德创业环保设备有限公司 MULTOTEC 过程设备公司 FP/ALL/-DENSE INDEX目 录 1.0 Introduction简介 2.0 General Description综述 3.0 Installation安装 4.0 Operation操作 5.0 Predicted Performance性能预测 6.0 Inspection and Maintenance检测维修 7.0 Recommended Operating Spares运行备件推荐 8.0 GA Drawing and Brochure总图和手册 9.0 Handling and Storage运输与存储 IDX/ALL/-ALL 1.0 INTRODUCTION简介 Thank you for purchasing a Multotec cyclone, which was wholly designed and manufactured by Multotec Process Equipment. Our cyclone designs are constantly under review and new process ideas are continually investigated to ensure that we offer our customers: State of the art technology and performance A quality product A cost effective product A product which is robust in operation This manual provides a brief description of the cyclone that you have purchased and offers other information in the following areas: 感谢您购买MULTOTEC生产的旋流器，该旋流器的生产及设计均在南非由MULTOTEC过程设备公司进行。我们在实践中不断的摸索改善旋流器来满足我们的客户： ⅰ） 技术和性能的概述 ⅱ） 高质量 iii） 成本效率高 产品结实耐用 该手册对您所购买的旋流器提供简介及以下信息： Installation Operation Performance Maintenance Spares 安装 操作 性能 维护 备件 Drawings Ancillary Products 图纸 附属产品 Whilst this manual can only provide limited information, further assistance in any area can be obtained by contacting Multotec directly and speaking to one of their cyclone engineers. 该手册提供的信息有限，进一步的咨询请与MULTOTEC工厂的旋流器工程师联系，或者与北京华德创业环保设备有限公司联系。 1/ALL/-ALL 2.0 DESCRIPTION 综述 Our dense medium cyclones are available in the following wear materials: High Chrome Cast Iron Mild Steel with Alumina Tiles Mild Steel with Silicon Carbide Liners Polyurethane 我们的重介旋流器有以下材质可选 高铬铸铁 低碳钢，内衬高铝陶瓷 低碳钢，内衬碳化硅 聚氨酯 Your cyclone material has been chosen to most cost effectively match your particular wear characteristics. The modular design of the cyclone is shown in the figure over pag