AlCrN硅基陶瓷在大气、海水环境下的摩擦性能研究-有色金属科学与工程.docVIP

_______________________________ 基金项目：江西省高等学校科技落地计划项目 (KJLD12072) , 江西省教育厅科学技术研究项目（GJJ14414） 通讯作者：陈颢（1978-），男，博士，教授，主要从事钨基粉体及硬面材料研究, E-mail: HYPERLINK mailto:chenhao_168168@163.com chenhao_168168@163.com 作者简介：章杨荣（1990-），男，江西上饶人，硕士, 从事表面硬质涂层研究；E-mail: HYPERLINK mailto:zyrmaterial@163.com zyrmaterial@163.com。 AlCrN/硅系陶瓷在大气、海水环境下的摩擦学性能 章杨荣1，陈颢1, 2，熊伟1 (1.江西理工大学 材料科学与工程学院，江西 赣州 341000；2.钨资源高效开发及应用技术教育部工程研究中心，江西 赣州 341000； ） 摘 要: 采用多弧离子镀技术在316L不锈钢基底上沉积AlCrN涂层。通过扫描电子显微镜（SEM）、X 射线衍射仪(XRD)、纳米压痕仪等分析测试手段，对镀层的形貌、成分、相结构、硬度等进行表征，并利用摩擦磨损实验机Rtec考察AlCrN/陶瓷（Si3N4、SiC）在大气、海水环境下的摩擦学性能。结果表明：在大气、海水环境下，AlCrN/SiC的摩擦系数和磨损率都远小于AlCrN/Si3N4；SiC球表面的微观凹坑对氧化膜SiO2起到收纳作用，同时减少磨粒磨损。较之于Si3N4陶瓷配副，AlCrN涂层与SiC陶瓷对磨时表现出更为优异的摩擦学性能。 关键词: 多弧离子镀；AlCrN涂层；Si3N4；SiC；海水；摩擦学 中图法分类号：TF123 文献标识码： A Tribological performance of AlCrN coating sliding against Si-based ceramic balls in ambient air and seawater conditions ZHANG Yangrong1，CHEN Hao 1,2，XIONG wei 1 (1.School of Materials and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou, 341000,China；2.Engineering Research of Center of High-efficiency Development and Application Technology of Tungsten Resources, Ministry of Education, Ganzhou, 341000, China；) Abstract: AlCrN coatings were deposited on 316L stainless steel substrates by the multi-arc plating technique. Composition, morphology, phase and hardness of the AlCrN coatings were characterized by scanning electron microscope (SEM), x-ray diffraction (XRD) and nano-indenter tester. The tribological performance of AlCrN coatings sliding against the Si3N4 and SiC ceramic balls under ambient air and seawater conditions were investigated by using a tribometer (Rtec). The results show that the coefficient of friction and wear rates of AlCrN/SiC are far lower than that of AlCrN/Si3N4 in both environments. The tribochemical product (SiO2) occurs on the wear area and being acted as a lubricant. Dimples on the surface of SiC are in favor of ke