基于RFID的模具工件定位系统关键技术研究-材料加工工程专业论文.docxVIP

Abstract The real-time acquisition of mould processing field information is necessary for its automatic production transformation. Due to the disadvantage of human disturbance and contact-type, traditional bar code information acquisition could not fix the issue of real-time production information. According to the characteristics of the mould production, mould processing field information is directly related to its location information. In the light of the RFID technology’s simple manipulation and flexibility of automatic control, building a reasonable mould production positioning system by using RFID position technology provided feasible ideas and methods for real-time acquisition of information of mould manufacturers. In the paper, the mold processing enterprises’ actual environmental layout was analyzed in detail, different workpiece positioning schemes were designed according to different workpiece machining positioning requirements. The RSSI positioning model was put forward for workpiece processing positioning in mould assembly, tryout and tooling repair areas, etc. And the feasibility validation of positioning model was completed by simulation experiment. Finally, the system requirement analysis, positioning process, function model were conducted. The positioning model’s building technology adopted in the system was deeply studied. The paper mainly discussed the input/output technology such as data normalization and model evaluation. On the other hand, the building principles of positioning models of BP Neural Network and Naive Bayes were discussed in detail. Based on above studies, the workpiece positioning system based on RFID was implemented. The system can handle workpieces’ different processing location positioning requirements flexibly, obtain workpieces’ location information quickly and steadily, and complete the on-site real-time acquisition of information during mould processing. In addition, the system was beneficial to the