美国铝业技术总监罗伯特在重庆大学培训.pptxVIP

Presentation Outline;Non-Heat Treatable Alloys1xxx, 3xxx, 5xxx;1xxx Sheet and Foil Alloy Systems;1xxx Alloy Compositions;Chemical Composition Limits;Alloys and Microstructure;Al-Fe Phase Diagram;Fe-bearing Constituents;Metallurgy and Industrial Application of Aluminum Alloys;Al-Fe-(Si) Phases;Microstructure of Alloy 1100-O Sheet;Al-Fe-Si Phase Diagram at 0.25% Fe;Al-Fe-(Si) Phases in 1xxx Alloys;Al-Fe-(Si) Phases in 1xxx Alloys;Increasing Strength of 1xxx Alloys;Fe Additions can Reduce Grain Size of 1xxx Sheet Samples Rolled 96% Prior to Annealing;GA 37998.17;Constituent Particles Effect on Fracture;GA 37998.19;GA 37998.20;Alloys and Microstructure;Formation of Dispersoids in NHT Alloys;Solid Solution;Effect of Total Weight Percentage of Alloying Elements on Yield Strength During Cold Rolling;Electrical Conductivity (EC);The resistivity of pure Al is 2.655 mW-cm EC = 172.41 / resistivity (%IACS) Solute effects: Dr in mW-cm / (wt. %);Fe in Solution can Affect Recrystallization in high-Purity Alloys;Aluminum Purification Methods;Boron Additions to Remove Peritectics;Purification of Aluminum by the Segregation(偏析) Method;Typical Variation in Purity in the Segregation Process;Impurities and Alloying Elements;The Origin of Structural Streaking;Fir Tree Structure in DC Ingot(铸锭)Etched cross-section;Scalping to remove as-cast Surface;Structural Streaks Al-Fe-(Si) Phases;Schematic of “Fir Tree” Structurein DC Cast 1xxx or 5xxx Alloy Ingot;“Fir-Tree” Structure inDC Cast 1100 Alloy Ingot;39