AIM DPM-1-2006标准(二维码标刻等级标准).pdfVIP

AIM Global Document: AIM DPM-1-2006 Direct Part Mark (DPM) Quality Guideline Document Type: AIM Bar Code Guideline Document Version: 1.0, 2006-12-12 Foreword This document was prepared by the Technical Symbology Committee (TSC) of AIM, Inc. (AIM Global), the trade association for the Automatic Identification and Mobility industry. AIM Global is the source for technically accurate, unbiased, commercial-free, and up-to-date information on all Automatic Identification and Mobility technologies including: Bar Code including 2-D Symbologies Biometrics Enterprise Mobile Computing Machine Vision Magnetic Stripe Optical Cards Optical Character Recognition Radio Frequency Identification Smart Cards Touch Memory Voice Recognition WLAN The association serves members world-wide through a network of AIM chapters. Member companies represent a wide array of AIDC technologies either as manufacturers or providers of equipment, systems, and services. A listing of AIM Global’s membership and chapters can be found at (). Published by: AIM, Inc. 125 Warrendale-Bayne Road Suite 100 Warrendale PA 15086 Phone: +1 724 937 4470 Fax: +1 724 934 4495 Internet email: aidc@ Web: Copyright © AIM, Inc. 2006 All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Neither AIM, Inc. or its individual officers, affiliates, or member companies, individually or collectively assume any liability for the use of this document. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. AIM, Inc. shall not be held responsible for identifying any or all such patent rights. Individuals or organizations that hold intellectual property that may be referenced in this document are encourag