基于自锁原理磁悬浮飞轮电磁锁紧机构.pdf

17　 10 　 Vol.17　No.10 2009 10　 　 　　 　　　　 　　Optics and Precision Engineering 　　　 　　　 　　 　 Oct.2009 　1004-924X(2009)10-2456-09 韩邦成, 刘　强 (北京航空航天大学新型惯性仪表与导航系统技术国防重点学科实验 , 北京100191) :, 。 158 g /, 45 mm×49 mm×40 mm。 / , /。 , , 、。 , 650 N, 133.8 N -9.4 N, , , 。 　　:磁悬浮飞轮;锁紧机构;自锁 :V 249.1;T 133.7　　:A Electromagnetic locking device based on self-locking for magnetic suspended flywheel AN Bang-cheng, LIU Qiang (N ovel Inertial Instrument N avigation System Technology K ey L aboratory of F undamental S cience f or N ational D ef ense,Beihang University , Beij ing 100191, China) Abstract:It is necessary to develop a locking device for the magnetic suspended flywheel in a satellite launching.In this paper, a repeatable electromagnetic locking and unlocking device with a mass of 158 g and a dimension of 45 mm×49 mm×40 mm was designed for a magnetic suspended flywheel.The composition and working principles of the locking device were introduced and the mathematical models for locking and unlocking were established.Then, several kinds of tests, the sine vibration, random vi- bration and impact vibration were carried out to verify the locking devicein ground and space environ- ments, and the curves of the locking force versus displacement and the unlocking force versus displace- ment were given.Experimental results indicate that the max locking force is 650 N and the holding locking and unlocking forces are 133.8 N and -9.4 N, respectively, which shows thegravitation has a little effect on the locking device and it can realize locking and unlocking effectively. Key words:magnetic suspended flywheel;locking device;self-locking 　　:2008-10-31;:2008-12-05. 　　:(No.51309030103) 10 　　　　, : 2457