基于can总线的车灯控制及电气检测系统研制-测试计量技术及仪器专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Car light, one of the important parts of the car, played a very important role in daily traffic safety, so it’s necessary to do the previous quality testing of the car light products. With the sustaining development of the science and technology, computer technology、 embedded technology、field bus technology and many other advanced technologies are begin to used in car light testing, so it can complete the large-scale quality testing of the new factory car lights, improve the reliability and efficiency of the quality testing. This paper designed an embedded car light controlling and electric testing system based on CAN bus, the system can control many groups of headlight and taillight; through the friendly man-machine interface of the upper computer, it is convenient to set the specific lighting rhythm of each group of car light according to the requirements, and monitoring their working voltage, current and other electric parameters in real time. The content includes: according to the system’s functional requirements, provides the whole design scheme and its framework structure of the system, then determine the data communication bus and communication protocol of the system; Then complete the design of the system’s hardware and software, the design of the hardware includes the selection of CPU, design of the power circuit、the peripheral circuit of the CAN communication interface、the peripheral circuit of the AD etc.; the software of the lower computer adopted the real-time operating system μC/OS-Ⅱas platform, the application part includes: divide of the system task, the initialization and the data transceiver based on iCAN protocol etc.; the upper computer can complete the function setting, and monitoring the electrical parameters of each lower computer controlling node at the same time, the software used VC to finish the design of the monitoring software, which is includes: the construction of the platf