经验总结-制李动电阻计算公式.docVIP

Calculating brake resistor sizes Dynamic braking resistors (DBR’s) for inverters and DC drive systems A drive motor can also act as a generator. If the drive system is built so as to allow reverse power to flow then this power can be fed into a resistor, thus taking energy out of the system and causing whatever is driving the motor to slow down. The rate of braking is determined by how fast the energy is put into the DBR. The DC link capacitance of any inverter drive can itself absorb 3-5% of the regenerated power. For non-critical applications these losses, together with the mechanical losses